Rock Tipper


Specifications

Construction

All welded steel construction with ST 37.2 and Sandwich Floor.

Sides

6mm thick MS plate stiffened on outboard by inclined and horizontal stiffeners 4mm thick plate and stiffened on inboard by 80x80x8 mm angles.

Floor

Sandwich Floor, 40 mm thick Hard wood between 8 mm and 8mm thick MS plates and stiffened with 5mm thick pates from bottom and floor stiffened by inboard 80x80x8mm angles longitudinal at approx. 300mm spaces (centre to centre).

Tail Door

6mm thick MS plate stiffened on outboard by vertical and horizontal stiffeners 4mm thick plate and stiffened on inboard by 80x80x8 mm angles. Door is heavily hinged with forged steel hinges on top and with forged steel locking mechanism at bottom operated automatically.

Head Board

6 mm thick MS plate stiffened on inboard by 80x80x8mm angles.

Canopy

4 mm thick MS plate, for protection of cabin.

Sub frame

Chassis runner is fabricated from a UPN 200 x75. The upper frame is box section 200x100 Notch, inserted and welded on to the pressed channels under the floor. The lower frame is fixed to the chassis by means of side attachment plates which are welded to the frame and bolted to the chassis. Side locators are provided to firmly held upper and lower frame in the horizontal plane. The upper frame is heavily hinged at the rear with grease nipples.

Stabilizer

Made of box section steel structure. Moving joints with provision for greasing are made of high tensile steel shafts and bushes.

Hydraulic system: HYVA

Telescopic multi stage hoist, front end mounted European system. Pump is mounted directly to the PTO flange. (PTO & its control to be provided by the customer).Hydraulic reservoir is mounted on the chassis runner with oil level gauge and return line filter. Operation of the tipping system is pneumatically operated from the driver’s cabin with inbuilt safety to protect the PTO.

Accessories

  • Mudguard with mudflaps on rear axles.
  • Access ladder
  • Hooks on sides and canopy for tie down of tarpaulin.
  • Rear under run bar with reflecting sign.
  • Prop Stand on both sides.
  • Rock Ejectors for the Rear Tyres.
  • LED Side marker lights 4 nos. on either side of the body – Amber. Make Hella
  • Spare wheel carrier – subject to availability of space.
  • 1 No LED Beacon light with brake application at rear.
  • Side guard as per space availability with reflecting sign

Painting

Sand blasted to SA 2.5 standard and painted with one coat of epoxy primer (DFT-100µ)and two coats of polyurethane finish paint(DFT-50µ) single colour as per customer’s choice.

Total DFT is more than 150µ.