Mobile Workshop Unit
This is a customized specification for a Mobile Work Shop mounted on HYUNDAI HD170 4x2 CHASSIS WB-5850
Body approx. dimensions (external):
Length - 6400mm
Width - 2500mm
Height - 2000mm (Internal )
Manufactured using rolled steel channels reinforced by pressed steel or ‘I’ sections.
Complete flooring made of chequered steel plates 4mm thick.
Side walls, roof and headboard constructed using mild steel adequately reinforced by vertical and horizontal stiffeners. The entire structure is rigidly fixed on to the floor with suitable goal post to bear body weight age.
Body (Roof, Headboard and Rear Door) externally covered by light weight aluminum sheets. All joints are made leaf-proof to avoid water seepage.
Sides are provided with Aluminum Rolling Shutters with positive locking system.
Twin Leaf type rear door fitted with hinges and locks.
Oil Pump - 3 Nos.
The oil pumps will be air operated double acting universal oil pump and suitable to deliver high viscosity oil.
The pumps e (5:1) and suitable for drums of 180/200 kg
The average delivery of oil pumps shall be between (14 – 18) lit/min.
Grease Pumps - 1 No.
The grease pump shall be air operated double acting and suitable to deliver grease.
The pump ratio shall be (65:1) and suitable for drums of 180/220 kgs. capacity.
Three Phase 11 kVA Generator Diesel Engine Driven.
Single Phase Electric Air Compressor.
The compressor unit will be positive displacement piston type double stage air or oil cooled.
Normal working pressure to suit the lubrication system
Free air delivery at normal working pressure to suit the system.
Air tank capacity 300 liters Approx.
High Pressure Water Pump with spray nozzle.
3 mild steel hose reels with 15 mtrs. oil hose complete with mechanical oil meter and double valve oil gun.
One mild steel grease hose reel 15 mtrs. length complete with grease gun and flexible hose with grease fittings.
Air distributor block (filter regulator lubricator unit)
The hose reels will be automatic re-wind type and equipped with universal hose stop (hose reels are installed at rear).
Rear under run bar with step.
Spare wheel carrier – subject to availability of space.
Mudguard with mud flaps for rear wheels.
Rear reflecting sign on both sides and rear.
Tool box with 70 pcs Tools.
Access foldable steps on sides
Space for Tyres – 2no’s ( Tyres NOT in our scope of supply )
12 kg Fire Extinguisher with bracket – 1no.
MS Water Tank Capacity : 500 Ltrs.
1 Ton Chain Pully Block with beam for lifting Drums.
Drum Holders – 4 no’s
3no’s. Yellow marker lamps on the left side & right side – make Hella. (Germany.)
Internal Roof Lights 3no’s
Necessary Electrical outlets for the equipments.
3-Phase external shore line fitting.
Sand blasted to SA 2.5 standard. One coat of primer and two coats of synthetic finish paint single colour White match to cabin.
One year from the date of delivery of product from all manufacturing defects.