Curtain-Sider Semi-Trailer


Specifications

General

This is the customised specification for fabrication of 15 Mtrs Curtain Slider Semi Trailer with 3x9 Ton Air suspension Axles.

Body Size (Approx)

Overall Length : 15000 mm

Inner loading length : 14700 mm

Inner loading width : 2500 mm

Overall width : 2600 mm

Inner loading height : 2400 mm

Construction

All welded construction using mild steel box sections and channels including the frame work.

Floor

Platform deck covered by steel chequered plate 5mm thick.

Front Wall

Fixed Front headboard with steel hallow section frame externally covered with 2 mm thick aluminum sheet.

Rear Wall

-Pair of Full height double opening rear barn doors fully made up of fixed rear board closed with metal sheet.

Roof

Fixed Roof.

Side Wall / Curtains

- Single Colour Curtain as per customer requirement including LOGO.

- Curtain side buckle type made of 28 Oz, 2x2 Panama double thread weave with tear resistant polyester matting that has PVC coating and a high gloss lacquer top coat.

- SS locking custom seal buckets every 60 cm.

- Roller bearing rollers every 60 cm attached to 1.2 tonne PVC vertical belts.

- Reinforced end pockets for poles.

- Extra horizontal 1.2 ton welded traps.

- Pelmets.

Chassis

Longitudinal welded type made of special steel. Cross members of performed beams / fabricated channels.

King Pin

2” diameter to SAE standard mounted on a heavy friction plate – Jost.

Landing Gear

Heavy duty two speeds with flat swivel feet manually operated – ‘Jost’

Brakes

Two line air pressure brake system WABCO working on all wheels suitable for coupling with truck braking system.

Running Gears (Axles)

BPW / SAF Axle 3 x 9 ton Air suspension with complete options (automatic adjusting break power – low and raise valve and Front Single Axle lift) Drum break and ABS

Rims : 6+1 off 11.75 x 22.5 –Disc Type

Tyres : 6+1 off 385/65 R 22.5 Bridgestone Or Equi.

Electrical

7 way quick release connecter.

Pair of 24 volts rear light units, each Comprising tail light, brake and signal lights fitted with high intensity bulbs with protective grills.

6 no’s. Yellow marker lamps on the left side & right side – make Hella or Germany on each body.

Accessories

Rear under run bar.

Rear provided with HD Rubber Stopper.

Spare wheel carrier winch type.

Mudguard with mud flaps for rear wheels.

Rear reflecting sign on both sides and rear.

Tool box without tools.

Side protection guards as per space available.

GRP Water Tank Capacity 50 Litres – 1 No

Painting

Structure Sand blasted to SA 2.5 standard. and the body one coat of etch primer and two coats of finish paint and PVC Curtain colour as per customer choice.

Warranty

One year from the date of delivery of product from all manufacturing defects.